Jump to content

rlawless

Members
  • Content count

    34
  • Joined

  • Last visited

Community Reputation

10 Good

About rlawless

  • Rank
    Member
  1. rlawless

    Firmware v1.1.6 Issues

    Thanks Brian, Must have been a bad connection somewhere. I unplugged and reconnected the cable between the touch and the box the OBD connets to and so far so good. Any place we can get an error code list or a trouble shooting guide?
  2. rlawless

    Firmware v1.1.6 Issues

    After upgrading to the subject firmware, every attemp to re flash the ECM causes the error code #1 (return to stock).. So the ECM returns to stock mode then I can flash the ECM with a new UDC Pro tune (ECM Flash). Has anyone had this issue? The battery is fully charged and I have tried with a charger connected and still have the same results.
  3. Very satisfied with UDCPro tuning. Powerful smooth and clean results so far. I basically have fueling and torque that TNT-R SW7 provides with out any smoke at all. Truck feels powerful and smoother than UDC tunes did. I know there is a lot more to learn. I would really like to see the tuning manual and a sample tune from Marco.
  4. rlawless

    Sample Tunes

    I take it there are no Sample Tunes with the UDC Pro RT software?
  5. rlawless

    Smarty Touch LED Flashing "2 Red 1 Green 2 Red"

    Problem fixed.. I removed and re inserted the OBDll connection and it returned to the return to stock mode.
  6. This happened to me also.. I was told to use firmware version 1.1.1 or 1.1.2 in order to use my TNT-R. It worked fine after returning to 1.1.2 firmware. If you are going to use the UDC Pro version for tuning you will need the 1.1.3.
  7. rlawless

    Smarty Touch LED Flashing "2 Red 1 Green 2 Red"

    The firmware loaded fine. A msg box (white & Blue) came up stating a new firmware version was different than what was on the ecm and that the ecm needed to be reprogramed. So I tried to return the ecm back to stock and that is when the error code #1 came up after several minutes and the screen was locked up. I unplugged it, plugged it back in and only get the red and green code flashing. 2 red, 1 green, 2 red with no screen.. I cant go into config tools because the S-Touch will not boot up/turn on (I have no diplay), I only can see the LED flashing the red green code.. The truck did start up but, I think it still has the UDC custom tune on the ecm. The problem is the S-Touch This is the same issue I am having: http://smartyresource.net/forum/showthread.php?894-Smarty-Touch-blank-screen-blinking-LED&p=4399&viewfull=1#post4399
  8. Tried returning truck back to stock after changing to firmware 1.1.3 and had a error code #1. Blank screen on smarty touch with the LED (right hand) flashing 2 Red, 1 Green, 2 Red.
  9. rlawless

    UDC Touch SD

    In order to use your UDC tunes on the S-Touch, place the SD card into your computer. In the UDC software, open the UDC File (s) you want to use on your truck and then use the "write file to Smarty" feature under the Smarty drop down menu. You can have as many UDC tune files on the SD card that it can hold. You can only use original UDC tunes on the S-Touch when the firmware is 1.1.1 or 1.1.2. If your S-Touch has firmware version 1.1.3 (UDC Pro RT) you cannot use any UDC tunes. I've been there done that already. I don't see the 1.1.2 firmware listed on Mads web site any longer only the 1.1.1 version.
  10. rlawless

    UDC Tuning Software Version

    Brian, After updating to the latest UDC Software 1.1.15.0 and Smarty Touch v1.1.1, I cannot open my UDC Tune files and this is the message window. Any ideas? I have uninstalled and reinstalled the UDC Software several times with no change. I must be missing something! I have tried updating the UDC settings and it states that I have the latest. Thanks Randy
  11. Please put me on the list :winking:
  12. When and how can we get the Pro RT Dongle?
  13. rlawless

    UDC Tuning Software Version

    I down loaded the software, tried to install it and it's V1.1.14 https://036b2b7.netsolstores.com/SmartyUDC.aspx
  14. rlawless

    UDC Tuning Software Version

    Wondering why the latest UDC Software version 1.1.15.0 is not available here http://smartyresource.com/SmartyUDC.aspx at SmartyResource.com? It's been availible since May 6, 2015 on the MADS Electronics web site. Just Saying! :facepalm:
  15. rlawless

    Best mpg setting with stock trans

    LOL, I was referring to your post #2 which was a reply to the original poster #1 in this thread.. http://smartyresource.net/forum/showthread.php?741-Best-mpg-setting-with-stock-trans&p=3719&viewfull=1#post3719 His truck is in the 2003 - 2007 MY same as mine..
×